HT-75A automatic extrusion blow molding machine: one-step method, one-shot molding, hydraulic, fully automatic extrusion blow molding machine, automatic cutting and flashing device, can blow a variety of thermoplastics such as PE, PP, AS, etc. For any shape of raw material, the capacity is from 5 ml to 15 liters of plastic hollow container. The machine is fully automated, high energy saving, low noise, fast speed, high efficiency, safe and reliable. It is widely used in plastic packaging industry such as toys, food, beverage, medicine, chemical, pesticide, detergent, etc. Pesticide bottles, cosmetic bottles, large caliber bottles, hot filling bottles, etc. This machine has less investment, quick effect and convenient operation and maintenance. Security, commissioning, training, perfect quality assurance, full service, let you buy and use two assured, is the ideal choice for your purchase. The HT-75G machine has a single-die single-station.
Model | HT-75A | |
Suitable raw materials | PE、PP、AS... | |
Theoretical yield | Depending on the type of bottle | 350 Pcs/h (15L) |
Maximum capacity of the product | 1 cavity | 1 |
Number of dies | Number | 1 |
Number of stations | Number | 1 |
Extrusion system | Screw diameter | 75mm |
Screw diameter ratio | 25:1/20:1 L/D | |
Screw speed | 10-50 r/min | |
Plasticizing ability | 80kg/h | |
Mold | Number of cavities and number of dies | 1 cavity 1sets |
Product diameter | 140mm | |
Mold thickness | 80~170mm | |
Moving template stroke | 170mm | |
Clamping force | 100KN | |
power | power supply | 220-380V,3 segment 50-60hz |
Heating energy | 11KW | |
Drive motor | 18.5KW | |
Average power consumption | 19KW | |
Air pressure | 0.8Mpa | |
Machine size | Length * width * height | 3000*2000*2850mm |
Machine weight | 3800kg | |
Auxiliary equipment | Low pressure air compressor 1 (required) | 1.6M3/1.0Mpa/15KW |
grinder | 60 | |
Mixer | 200kg |
Please make sure your E-mail address is correct otherwise the recipient will not be able to reply.